7x7cm 200w White Ceramic IR Heater for Soldering Stations
Brand: Mlink
VAT included (Ex VAT: 7.00 €)
Volume Discounts
| Quantity | Price | Save |
|---|---|---|
| 2+ | 8.27 € | -4% |
| 10+ | 7.60 € | -12% |
| 20+ | 7.06 € | -18% |
7x7cm 200w White Ceramic IR Heater Mlink
This 7x7cm ceramic IR heater with 200w power is a replacement component designed specifically for soldering and reballing stations, especially for Mlink brand equipment. Its ceramic design allows for even heat distribution, ideal for electronic soldering processes and component repair.
Main features:
- Dimensions: 7x7 cm, suitable for stations that require this specific size.
- Power: 200w, provides fast and efficient heating.
- Colour: White, which makes identification and compatibility with Mlink equipment easier.
- High-quality ceramic material for optimal thermal resistance.
Typical uses:
- Replacement in Mlink soldering and reballing stations.
- Heating for electronic soldering processes and component repair.
- Ideal for technicians and professionals who require precision in thermal control.
Compatibility:
This heater is compatible with various soldering and reballing stations from the Mlink brand. It is recommended to check that the size and power match the original heater in your machine before purchasing. For questions or compatibility confirmation, you can consult our technical team.
Important note: This product is currently out of stock. We recommend checking availability or alternatives in our store.
- 7x7cm ceramic IR heater compatible with Mlink stations
- 200w power for fast, even heating
- Durable ceramic material for greater longevity
- Ideal replacement part for soldering and reballing stations
- White colour for easy identification and compatibility
Customer Questions & Answers
What type of reballing stations is this 7x7 cm 200 W ceramic heater compatible with?
This 7x7 cm 200 W ceramic IR heater is typically compatible with reballing stations that accept heating plates of that size and power, such as some Mlink models and other platforms with support for interchangeable 70x70 mm modules. It is recommended to check the dimensions, connections (normally blade-type wiring or screw terminals) and power limits against your equipment manufacturer's specifications.
What materials is the heater made from and what is its average durability under continuous use?
The heater is mainly made of alumina ceramic for the surface and an internal heat-resistant alloy heating element (typically NiCr). Average durability under continuous operation depends on temperature and switching cycles; normally 5,000 to 10,000 hours of use can be expected under standard laboratory conditions, although factors such as overheating or poor thermal control can significantly reduce this time.
What are the recommended voltage and current values to operate the 200 W heater correctly?
The typical operating value for a 200 W ceramic heater is 220 V AC, which corresponds to an approximate current of 0.91 A (P = V x I; I = 200 W / 220 V ≈ 0.91 A). It is essential not to exceed the rated power or supply the heater with a different voltage to avoid damage or loss of efficiency.
Are there any particular safety precautions or standards that should be followed during installation and operation?
It is recommended to implement overheat protection and use personal protective equipment to avoid burns. In addition, installation must be carried out with the equipment disconnected from the mains and in accordance with IEC standards for hot electrical appliances. Secure fixing and proper insulation of the electrical terminals are critical.
How does this model compare with alternatives of other power ratings or sizes in terms of reballing efficiency?
A 200 W, 7x7 cm heater offers a good balance between size and power for small to medium circuit boards. Higher-power or larger-surface models (for example, 300 W or 10x10 cm) deliver heat faster or cover a larger area, but may be less precise and create overheating risks for sensitive components. The choice depends on the PCB size and the thermal sensitivity of the parts being repaired.
Is this heater compatible with any soldering station?
This heater is mainly designed for Mlink soldering and reballing stations. It is recommended to check the dimensions and power to ensure compatibility.
What should I do if the heater does not match the one in my machine?
Before buying, check that the measurements and power match your original heater. If you have any doubts, consult our technical team for advice.
Is this product available for immediate dispatch?
This 7x7cm 200w white ceramic IR heater is currently out of stock. You can check availability or alternative products in our store.
Write a customer review
Customers who bought this item also bought
Your Recently Viewed Items
