12.18 €
In Stock
32-89mm TSX TOOL Cylinder Hone for effective cleaning and polishing
Brand: TSX TOOL
12.18€
VAT included (Ex VAT: 9.90 €)
In Stock - Ships immediately
Standard delivery
Fri, May 1 - Tue, May 5
Express delivery
Wed, Apr 29 - Thu, Apr 30
30-day returns
Free returns within 30 days
Secure transaction
Share:
Free Delivery
Shipping from €4.99
Easy Returns
30 day return policy
Secure Payment
100% secure checkout
Quality Guarantee
Original products only
32-89mm TSX TOOL Cylinder Honing and Lapping Tool
This cylinder hone is a specialist tool designed to clean and hone the inside of cylinders, making it easier to replace rings or pistons in engines. Its practical design allows simple, efficient use, adapting to small and medium-sized cylinders.
Key features
- Compatible with cylinders from 32 to 89 mm (1-1/4" to 3-1/2")
- Fits directly onto the drill chuck for precise alignment
- The legs are adjusted by spring pressure for even contact with the surface
- Includes medium-grit stones for an optimal finish
- Stone size: 51 x 7 mm
- Lightweight at 0,2 kg for easy handling
Typical uses
This honing and lapping tool is ideal for engine repair and maintenance workshops, especially for polishing and internal cleaning of cylinders before fitting new pistons or rings. Its compatibility with power drills makes it a versatile and practical tool for professional mechanics and hobbyists alike.
Compatibility and recommendations
It is recommended to use this hone with drills that allow proper speed control to avoid damage to the cylinder surface. It is suitable for small and medium cylinders, making it an essential tool for the maintenance of vehicle engines and light machinery.
Thanks to its design and materials, the TSX TOOL hone ensures a uniform, professional finish, improving engine efficiency and extending the service life of its components.
- Compatible with cylinders from 32 to 89 mm (1-1/4" to 3-1/2")
- Fits directly onto the drill chuck for precise alignment
- Spring-loaded adjustable legs for even contact
- Includes medium-grit stones for an optimal finish
- Stone size: 51 x 7 mm
- Lightweight at 0,2 kg for easy handling
Customer Questions & Answers
What are the materials and dimensions of the stones included with the hone, and what kind of finish do they produce?
The included stones measure 51 mm long by 7 mm wide and are medium grit, typically aluminium oxide. These stones are designed to produce a uniform cross-hatch finish, ideal for seating new rings, although they are not recommended for fine precision finishing. The medium grit provides a balance between material removal and smoothness.
What type of power tool is required to operate this lapping hone, and are there any speed or power limitations?
This hone is designed to fit a standard electric drill with a chuck of at least 10 mm. It is recommended to operate at low to medium speeds, typically between 700 and 1200 rpm, to avoid overheating and premature wear of the stones. It is not compatible with motors exceeding 1500 rpm or with impact function.
How is the hone maintained after use, and what is its approximate service life under regular use?
After each use, it is recommended to clean the stones and body with a soft brush and degreasing solution to remove metal and lubricant residues. The stones should be replaced when their usable length drops below 30 mm or if they show uneven wear. Under regular use, the stones last between 15 and 30 cylinders, depending on the material and working conditions.
How does this hone differ from similar models in the 50-100 mm range or automatic hones?
The main difference is its ability to work on smaller internal diameters, making it more versatile for small cylinders. Compared with automatic models, this tool requires more manual input and skill, although it is more affordable and allows greater control over honing pressure. Automatic hones offer greater speed and consistency, but less flexibility for small diameters.
What is the 32-89mm cylinder hone used for?
It is used to clean and hone the inside of small and medium cylinders, making it easier to replace rings or pistons in engines.
What tools is this hone compatible with?
It fits directly onto the chuck of power drills, allowing simple, aligned use.
What cylinder sizes can this hone work with?
It is compatible with cylinders with a diameter between 32 and 89 mm (1-1/4" to 3-1/2").
Does it include accessories?
Yes, it includes medium-grit stones for suitable polishing.
Is it easy to use?
Yes, it is designed to operate with ease, with adjustable legs that make even contact with the surface.
Write a customer review
Customers who bought this item also bought
-4%
Your Recently Viewed Items
12.18 €