Complete universal injector puller set for Common Rail and diesel engines
Brand: TSX TOOL
VAT included (Ex VAT: 99.00 €)
TSX TOOL universal injector puller is the most complete kit for professionals who need to remove diesel injectors without removing the cylinder head. Compatible with 99% of injectors on the market, this set is ideal for Common Rail, CDI, Mercedes, TDI and VAG group engines, as well as brands such as Denso, Siemens Bosch and Delphi.
This professional puller makes it easier to remove mounted parts in the injection system, even very seized injectors, thanks to its different hammers that help distribute the weight and force according to the adapter and the pressure supported. Carbon build-up, rust and how long the injector has been in place all affect the force needed to remove it, and this kit offers more than 40 adapters for claw, thread or sleeve fitment.
The case includes parts with references EN10036, EN10073, EN10095, EN10115 and multiple EN10116 and EN10112, covering all needs for Common Rail and diesel engines.
Features and specifications:
- 5 impact puller hammers for different force levels
- 32 cm extension bar for hammers
- 5 puller sockets for 1/2" ratchet
- 7 adapters (M14, M17, M20, M24, M25 and 2x M27)
- 29 mm puller with 5 faces and side opening
- Puller with internal thread
- Pulling shaft and universal adapter
- 2 claw adapters and 2 pullers for Bosch, Delphi, Denso & Siemens
- 2 pullers with internal thread and 1 universal puller for Mercedes
- 2 locking hooks
- 13 female-thread adapters and 6 male-thread adapters
- 2 nuts to limit hammer travel
Typical uses:
Ideal for workshops and professionals working with modern diesel engines and Common Rail injection systems. It allows injectors to be removed without taking off the cylinder head, saving time and avoiding engine damage. Compatible with 1.6 HDI engines from the PSA Peugeot Citroën group and other vehicles from the VAG group and Mercedes.
Compatibility:
Compatible with most diesel injectors on the market, including Common Rail, CDI, Mercedes TDI, VAG group, Denso, Siemens Bosch and Delphi. Suitable for modern diesel engines and advanced injection systems.
- Compatible with 99% of diesel injectors on the market
- Includes 45 pieces for professional removal
- Varied adapters for thread, claw and sleeve fitment
- Ideal for Common Rail, CDI, Mercedes, TDI and VAG group engines
- Allows removal without taking off the cylinder head
- Includes impact puller hammers and extension bar
- Compatible with Denso, Siemens Bosch and Delphi brands
- Ideal for workshops and automotive professionals
- Includes specific pullers for Bosch, Delphi, Denso and Mercedes
Customer Questions & Answers
What advantages does this injector puller kit offer over other common diesel injector models?
This kit offers near-universal coverage thanks to its set of more than 40 adapters, allowing injector removal from multiple brands (Bosch, Delphi, Siemens, Denso) and vehicles (Mercedes, VAG, TDI, Common Rail, CDI) without removing the cylinder head. Unlike basic kits, it includes claw, threaded and sleeve-fit adapters, plus several slide hammers so you can choose the right force depending on the injector’s condition.
Is any additional tool or special equipment required to use this injector puller?
In general, the kit is designed as a self-contained solution; however, it is advisable to have a standard socket wrench and a compatible slide hammer (included in some sets). No electrical connections or pneumatic tools are required, but it is always recommended to consult the vehicle manual for any fitting specifics.
What safety precautions should be considered when operating this puller?
We recommend using mechanical protection gloves and safety glasses, as extraction may produce swarf or sudden movements. Always check that the injector is cold before handling it and follow the manufacturer’s instructions to avoid damage to the cylinder head or surrounding parts. The equipment is not designed for use in explosive atmospheres.
Does the kit include any warranty, and is it possible to buy replacement specific adapters?
The kit usually comes with a minimum 12-month warranty against manufacturing defects, although the exact coverage may vary by supplier. Replacement adapters can be requested through the distributor by identifying the specific reference (for example, EN10036, EN10095, EN10115). We recommend keeping the list of included parts to make replacements easier.
Which engines is this injector puller compatible with?
It is compatible with Common Rail, CDI, Mercedes TDI, VAG group diesel engines and 1.6 HDI engines from the PSA Peugeot Citroën group.
Can I remove injectors without taking off the cylinder head?
Yes, this puller is designed to remove injectors without needing to remove the cylinder head, making the job easier and saving time.
How many adapters does the kit include?
The kit includes more than 40 adapters for different types of fitment: claw, thread and sleeve fitment.
Is it suitable for professional use?
Yes, it is a professional kit with durable and varied tools for workshop and automotive professional use.
Which injector brands does it support?
It supports injectors from brands such as Denso, Siemens Bosch, Delphi, Mercedes and other common manufacturers used in diesel engines.
Write a customer review
Customers who bought this item also bought
Your Recently Viewed Items
