Mini High-Pressure Autoclave for Removing Bubbles from Repaired LCD Screens
Brand: Mlink
VAT included (Ex VAT: 250.00 €)
Volume Discounts
| Quantity | Price | Save |
|---|---|---|
| 2+ | 295.20 € | -4% |
| 20+ | 276.75 € | -10% |
The Mini High-Pressure Autoclave for removing bubbles from repaired LCD screens is a specialised tool designed to effectively remove bubbles that can become trapped in LCD screens after glass replacement, especially when using OCA adhesive film. This machine creates a controlled vacuum and heats the screen precisely to ensure a professional finish free from imperfections.
It is important to note that a vacuum pump is required for operation and is sold separately, as the autoclave does not include this component.
Key features
- Pressure gauge: Allows you to view the vacuum level inside the autoclave for exact process control.
- Digital thermostat: Controls the temperature with adjustment in 1ºC increments, showing the current and target temperature in real time.
- Integrated timer: Allows you to programme the heating time to suit different types of screens and adhesives.
- Internal metal support: Space to place screens up to 20x12 cm, ensuring secure holding during the process.
- 6 mm steel lid: Makes placement and removal easier, guaranteeing an airtight seal with a four-point locking system.
- Power button: Easy operation to start and stop the process.
Technical specifications
- Model: Mini autoclave
- Power supply: 220V (50Hz)
- Temperature adjustment: Digital adjustment in 1ºC steps
- Door fastening system: 4 locking points
- Weight: 24 kg
- Dimensions: 320 mm (width) x 340 mm (height) x 240 mm (depth)
Uses and compatibility
This autoclave is specially designed for workshops and professionals who carry out LCD screen repairs on mobile devices and other electronic equipment. It is compatible with screens that use OCA adhesive film for glass bonding, helping to remove bubbles that affect the visual and functional quality of the device.
Thanks to its temperature and vacuum control, it significantly improves the final finish after glass replacement, avoiding common issues such as air bubbles or screen imperfections.
Recommendations
For optimum use, it is recommended to use a suitable vacuum pump and follow the manufacturer's instructions to adjust temperature and time according to the type of screen and adhesive used.
- Includes pressure gauge for vacuum control
- Digital thermostat with real-time temperature display
- Digital temperature adjustment in 1ºC increments
- Timer to control heating time
- Internal metal support for 20x12 cm screens
- 6 mm steel lid with 4-point locking system
- Power button for easy operation
- 24 kg weight and compact workshop dimensions
Customer Questions & Answers
What installation or electrical connection requirements does the autoclave have? Can it operate outside the European 220V 50Hz mains supply?
The autoclave is designed for a 220 V, 50 Hz power supply, common in Europe. It is not directly compatible with 110 V systems without a converter. Use on supplies with different voltage or frequency requires additional certified equipment to avoid damage to the unit.
What temperature range can the autoclave be set to and what is the tolerance compared with the thermostat reading?
The temperature control is digital, adjustable in 1 °C increments. While the typical recommended range for OCA lamination work is between 35 °C and 60 °C, the autoclave can operate across its full range without issue. The sensor tolerance is usually ±2 °C, which is sufficient for the intended applications.
In terms of maintenance and durability, what care is recommended and which parts may need replacing with frequent use?
It is recommended to clean the interior after each use to prevent adhesive residue build-up. Check the lid seals and pressure gauge regularly. Under intensive use, the sealing gaskets and internal support may need replacing after a few hundred cycles. No major faults have been reported if basic maintenance is carried out.
Does the Mini Autoclave include the vacuum pump?
No, the vacuum pump is sold separately and is required for the autoclave to operate.
What type of screens is this autoclave suitable for?
It is suitable for repaired LCD screens that use OCA adhesive film, especially after glass replacement.
How is the temperature controlled in the autoclave?
The temperature is adjusted digitally in 1ºC increments and shown in real time on the thermostat.
What is the maximum screen size that can be placed in the autoclave?
The internal support is designed for screens up to 20x12 cm.
Is the product currently in stock?
The product is currently out of stock.
Write a customer review
Customers who bought this item also bought
Your Recently Viewed Items
