Scania Euro 4/5 Plug and Play AdBlue System Emulator for Trucks and Buses

The Scania Euro 4/5 AdBlue System Emulator for Trucks and Buses is a device designed for heavy vehicles with Euro 4 and Euro 5 exhaust systems. This emulator performs a bypass on the communication lines between the original AdBlue module and the engine management system, ensuring that the vehicle does not enter emergency mode due to faults in the AdBlue system.

Main features:

• Compatible exclusively with Scania trucks and buses with Euro 4 and Euro 5 systems.
• Plug and play installation: simply connect the emulator to the diagnostic socket and remove the specified fuse.
• Performs a bypass only on the AdBlue control unit, while respecting the vehicle's other electronic systems.
• Prevents the vehicle from reducing power or performance in the event of an AdBlue fault or low AdBlue level.
• Transparent to the engine management system, it does not generate fault codes.
• Easy removal: reconnect the fuses and remove the emulator to restore normal operation.

How does it work?

The emulator sends a signal to the engine management unit indicating that the AdBlue system is working correctly and that the levels are within limits. In this way, if the AdBlue system fails or the tank runs empty, the vehicle does not enter emergency mode, allowing you to reach the refuelling point or workshop without delays.

Installation instructions:

• Carry out the installation with the truck stationary and the ignition switched off.
• Connect the emulator to the diagnostic socket.
• Remove the specified fuse for Scania vehicles (Terminal 42).

Compatibility:

This product is compatible only with Scania heavy vehicles fitted with a Euro 4 or Euro 5 exhaust system. It is not compatible with other models or systems.

Benefits:

• Prevents power reduction and driving limitations caused by AdBlue system faults.
• Allows you to continue the journey to a service point or workshop without interruption.
• Easy installation and removal without the need for special tools.

This emulator is a useful tool for drivers and workshops that need a quick and effective solution for AdBlue-related issues in Scania Euro 4/5 vehicles.

• Compatible with Scania Euro 4/5 trucks and buses
• Plug and play installation at the diagnostic socket
• Bypass only on the AdBlue control unit, without affecting other systems
• Prevents limp mode caused by AdBlue faults or low AdBlue level
• Does not generate fault codes in the engine management system
• Easy installation and removal without tools
• Allows you to reach a refuelling point or workshop without delays