Arduino Starter Kit with Compatible Arduino Uno for Beginners
Brand: satkit
VAT included (Ex VAT: 29.99 €)
Volume Discounts
| Quantity | Price | Save |
|---|---|---|
| 2+ | 36.64 € | -1% |
| 10+ | 35.67 € | -3% |
| 20+ | 35.41 € | -4% |
The Arduino Starter Kit is a complete solution designed for anyone looking to get started in electronics and programming with Arduino. This kit includes a compatible Arduino Uno board and a wide range of components that let you develop multiple projects and experiment with different functions.
Kit contents:
- 1 compatible Arduino UNO board
- 1 development expansion board
- 1 breadboard for prototyping
- LED kit (red, blue, yellow; 5 units of each colour)
- 1 74HC595 integrated circuit
- 2 buzzers for sound
- 1 seven-segment display (1 digit)
- 1 seven-segment display (4 digits)
- 10 push buttons
- 3 light-dependent resistors
- 5 10K resistors
- 5 1K resistors
- 8 220 ohm resistors
- 1 adjustable resistor
- 1 LM35 temperature sensor
- 1 1602 LCD display
- 1 PS2 joystick
- 1 stepper motor
- 1 stepper motor driver board
- 1 steering motor
- 1 RGB module
- 30 breadboard wires
- 10 Dupont wires
- 1 2.54mm pin header
- 2 mercury switches
- 1 flame sensor
- 1 infrared receiver
- 1 80 cm USB cable
- 1 remote control with CR2025 battery included
- 1 battery box
Features and specifications:
- Compatible with Arduino IDE for simple and flexible programming.
- Varied components for experimenting with sensors, actuators and displays.
- Ideal for educational projects, prototypes and hands-on learning.
- Includes accessories for easy and tidy connections.
Typical uses:
- Learning electronics and programming with Arduino.
- Developing DIY projects and hardware prototypes.
- Experimenting with temperature, light and motion sensors.
- Creating interfaces with displays, motors and RGB modules.
Compatibility:
This kit is compatible with most Arduino boards based on the Arduino Uno standard, and can be used with the Arduino IDE software available for Windows, macOS and Linux.
Note: The product is currently out of stock. We recommend checking availability or alternatives in our store.
- Includes a compatible Arduino Uno board for easy development.
- Wide range of electronic components for varied projects.
- LCD and seven-segment displays for data visualisation.
- Temperature, flame, light sensors and infrared receiver included.
- Motors and drivers for motion and robotics projects.
- Cables and accessories for quick, tidy connections.
- Ideal for beginners learning Arduino programming.
Customer Questions & Answers
What are the approximate dimensions and weight of the complete kit, and which materials are mainly used in its construction?
The complete kit measures approximately 22 cm x 14 cm x 6 cm and has a total weight of around 500 g. The main materials are fibreglass PCB with electronic components (UNO board and expansion board), ABS plastics for the buttons and motor chassis, and tinned copper wires with PVC insulation. Minor variations may occur depending on the batch.
Are there any electrical requirements to bear in mind when connecting the included motors and sensors to the Arduino UNO?
Yes. The Arduino UNO operates at 5 V and the maximum current per digital output pin is 40 mA. Some motors and sensors (such as the stepper motor) must be connected via the included driver board to avoid overloads. The simultaneous consumption of several modules should be below 500 mA, especially when powered via USB.
What common problems or errors can occur when using this kit, and how can they be solved?
Common errors include incorrect breadboard connections (which can cause short circuits or incorrect readings), installation of CH340 USB drivers (common on compatible boards), and poor contact in Dupont cables. It is recommended to check the schematic, inspect solder joints visually, and reinstall drivers from official sources. Component failures are uncommon given the low operating voltage.
Does the kit comply with safety standards, and is there any relevant risk when handling it?
The kit is designed to operate at low voltages (5 V) and limited currents, minimising the risk of electric shock. The components generally comply with RoHS and CE regulations similar to other educational kits. However, external power supplies above 9 V should be avoided, and motors should not be handled while running without supervision.
What does the Arduino starter kit include?
The kit includes a compatible Arduino Uno board, breadboard, LEDs, sensors, motors, displays, cables and accessories for multiple projects.
Is it compatible with Arduino IDE?
Yes, the included compatible Arduino Uno board works perfectly with Arduino IDE software for programming and uploading projects.
Is this kit suitable for beginners?
Yes, it is designed specifically for people starting out in electronics and Arduino programming, with basic and easy-to-use components.
Is the kit in stock?
The product is currently out of stock. We recommend checking the page for future availability or alternatives.
What kind of projects can I make with this kit?
You can create light control projects, environmental sensors, displays, stepper motor projects, basic robotics and more.
Write a customer review
Customers who bought this item also bought
Tower Pro SG90 9g Micro Servo for Arduino - Precise, Reliable Control
Reprap RAMPS 1.4 Pack + Arduino Mega + 5 A4988 Stepper Drivers for 3D Printers
Your Recently Viewed Items
Pack of 79 Direct Heat Stencils for BGA Soldering and Electronics Repair
