HoldPeak HP-90EPC Digital Multimeter RMS Auto Range with Battery Test and Min/Max

The HoldPeak HP-90EPC digital multimeter is an advanced instrument designed for professionals and electronics enthusiasts who require accurate and versatile measurements. This multimeter features RMS auto ranging, battery test, and advanced functions that make measurement easier in a wide range of environments and applications.

Main features:

• USB interface: Allows all measurement functions and ranges to be processed directly on a computer using a USB adapter and Windows-compatible software that emulates an RS232 port.
• LCD display: Shows up to 3999 digits with 20 mm height and green backlight that activates for approximately 10 seconds to make reading easier in dark environments.
• Smart functions: Includes data hold, automatic zeroing, automatic polarity indication, and displays alerts if the measured value is out of range.
• Power saving: Automatic shut-off with audible warning to extend the life of the 9V battery.
• Certified safety: Complies with EN61010-1, overvoltage category III (600V), CAT II (1000V), and pollution degree 2.

Measurement capabilities:

• DC voltage: 400mV to 1000V
• AC voltage: 4V to 750V, frequency 40Hz-400Hz
• DC and AC current: from 400 microamperes to 20 amperes
• Resistance: from 400 ohms to 40 megaohms
• Capacitance: from 51,2 nF to 100 µF
• Frequency: from 5,12 Hz to 5,12 MHz
• Duty cycle: 0.1% to 99.9%
• Diode test and audible continuity test
• Battery test from 1.5V to 12V
• Temperature measurement: from -20°C to 1000°C (up to 250°C with supplied sensor)

Technical specifications:

• Power supply: 9V battery
• Operating environment: 0-40 °C, relative humidity ≤ 85%
• Storage environment: -10 to 50 °C, relative humidity ≤ 85%
• Accuracy environment: 18-28 °C, relative humidity ≤ 70%, altitude ≤ 2000 m
• Dimensions: 88 x 40 x 205 mm (with case)
• Weight: approximately 320 g (with rubber protection and battery)

Typical uses: This multimeter is ideal for diagnostic and maintenance tasks in electronics, automotive, soldering stations and other electrical equipment. Its USB connection allows data analysis and logging on a PC, making work easier in the lab or in the field.

Compatibility: Compatible with Windows systems using included software for data management and viewing via USB.

• RMS digital multimeter with auto ranging for accurate measurements
• Built-in 1.5V to 12V battery test for checking battery condition
• Backlit LCD display with 20 mm digits for easy reading
• USB interface and software for connection and analysis on a Windows PC
• Advanced functions: data hold, automatic zeroing, polarity indication
• Measures voltage, current, resistance, capacitance, frequency and temperature
• Complies with EN61010-1 safety standards, Category III 600V, CAT II 1000V
• Automatic shut-off with audible warning to save battery life
• Compact size and lightweight design with rubber protection