Mlink H2-H4-H6 soldering station air turbine - original 24V spare
Brand: Mlink
VAT included (Ex VAT: 10.00 €)
Volume Discounts
| Quantity | Price | Save |
|---|---|---|
| 2+ | 11.81 € | -4% |
| 10+ | 10.86 € | -12% |
| 20+ | 10.09 € | -18% |
Product description
The Mlink H2-H4-H6 soldering station air turbine is a key component for the correct operation of Mlink soldering stations models H2, H4 and H6. Designed to operate at a voltage of 24V, this turbine guarantees a constant and efficient airflow that helps maintain the correct temperature during soldering processes.
Main features:
- Compatibility: Specifically designed for Mlink H2, H4 and H6 soldering stations.
- Voltage: 24V, ensuring optimum and stable performance.
- Function: Provides continuous airflow for cooling and temperature maintenance.
- Original spare part: Guarantees quality and durability for your soldering station.
Typical uses:
- Replacement for damaged or underperforming turbines in Mlink soldering stations.
- Preventive maintenance to extend the life of the equipment.
- Airflow optimisation in electronic soldering processes.
Compatibility and recommendations:
This turbine is compatible only with Mlink H2, H4 and H6 models. It is recommended to check the condition of the original turbine before replacement and make sure the station voltage is 24V to avoid damage to the equipment.
Important note: This product is currently out of stock. We invite you to check alternatives or contact our team for advice on compatible spare parts.
- Compatible with Mlink H2, H4 and H6 soldering stations
- Operating voltage: 24V for stable performance
- Provides constant airflow for optimum cooling
- Original Mlink spare part for maximum durability
- Ideal for maintenance and repair of soldering stations
Customer Questions & Answers
What are the dimensions, weight and main materials of the Mlink H2-H4-H6 turbine?
The turbine is made mainly from ABS plastic and aluminium. Its approximate dimensions are 80 mm x 80 mm x 25 mm and the total weight is 110 g. These measurements may vary slightly depending on the production batch.
What voltage, current and electrical specifications does this turbine require to operate properly?
The turbine operates at 24 V DC, with a typical current draw of 0.18 A (180 mA). It must be connected only to the turbine power output indicated for the Mlink H2, H4 or H6 station. It must not be powered with voltages above or below 24 V DC, as this may affect its service life.
Do I need any special tools or technical procedure to install this turbine in the soldering station?
Installation requires standard screwdrivers (Phillips or flat-head, depending on the model), and care must be taken to avoid damage to the wiring. It is recommended to disconnect the station completely from the mains before replacing the turbine. No soldering is required, as the connectors are plug-in type.
What common problems occur with the turbine and how can they be prevented or resolved?
The most common faults are blockage due to dirt or dust, and bearing wear. To prevent these, it is recommended to clean the air filter regularly and avoid operating the station in dusty environments. If the turbine makes unusual noises or the airflow decreases, it is best to inspect it and, if necessary, replace it.
Which soldering station models is this turbine compatible with?
This turbine is compatible with Mlink H2, H4 and H6 models.
What is the operating voltage of the turbine?
The turbine operates at 24V.
Can I use this turbine in other soldering station brands or models?
No, this turbine is specifically designed for Mlink H2, H4 and H6 stations and is not recommended for use in other models or brands.
What should I do if the turbine is out of stock?
If the turbine is out of stock, we recommend contacting customer service for advice on alternative spare parts or restock dates.
Write a customer review
Customers who bought this item also bought
Zhuomao BGA Nozzle 45x45 mm compatible with Mlink and Zhenxun for soldering stations
Zhuomao BGA Nozzle 12x12 mm compatible with Mlink and Zhenxun for soldering stations
Zhuomao 15x15 mm BGA nozzle compatible with Mlink and Zhenxun for soldering stations
