Satlink WS6903 satellite signal finder - 920 to 2150 mHz
Brand: Satlink
VAT included (Ex VAT: 7.99 €)
Volume Discounts
| Quantity | Price | Save |
|---|---|---|
| 2+ | 9.43 € | -4% |
| 10+ | 8.68 € | -12% |
| 20+ | 8.06 € | -18% |
The Satlink WS6903 satellite signal finder is an essential tool for installing and aligning satellite dishes. Designed to make satellite signal detection and optimisation easier, this unit provides accurate measurement across a frequency range of 920 to 2150 mHz.
Key features:
- Signal measurement: 920 to 2150 mHz, covering most frequencies used in satellite TV.
- Input range: -40 dBm to -10 dBm, allowing weak and strong signals to be detected accurately.
- Power supply voltage: 13-18V, taken directly from the receiver, removing the need for batteries or external power supplies.
This satellite signal finder is compatible with most satellite TV receivers that supply power through the coaxial cable, which simplifies use and reduces the equipment needed for installation.
Typical uses:
- Installing and aligning satellite dishes for satellite signal reception.
- Optimising signal strength to improve picture and sound quality on satellite receivers.
- Quickly checking signal strength and quality during maintenance or when changing location.
The Satlink WS6903 is a practical tool for technicians and hobbyists looking for a simple and efficient solution for finding and aligning satellite signals without complications.
- Signal measurement: 920 to 2150 mHz
- Input range: -40 dBm to -10 dBm
- Power supply voltage: 13-18V from the receiver
- No batteries or external power supplies required
- Ideal for installing and aligning satellite dishes
Customer Questions & Answers
What advantages does the Satlink WS6903 offer compared with other digital satellite finders in its price range?
The Satlink WS6903 stands out for its portability, direct power supply from the receiver (13-18V), and the ability to measure signals in the 920 to 2150 MHz range. It does not require batteries or an external power supply, making it easier to use outdoors than models that need additional equipment. However, it lacks a colour screen and advanced functions found in higher-end units.
What are the weight, exact dimensions and main materials of the Satlink WS6903?
The Satlink WS6903 weighs approximately 350 g. Its dimensions are 15 cm x 8.5 cm x 4.5 cm, and it is mainly made from high-strength ABS plastic, with metal satellite and power connectors.
What type of connectors does it use and is it compatible with HD satellite installations?
It uses standard F-type connectors, widely used in satellite aerial systems. It is fully compatible with SD and HD satellite signals within the 920–2150 MHz spectrum, provided the LNB and signal meet these specifications.
Does it require any specific setup to start using the unit, or is it plug and play?
The Satlink WS6903 is plug and play: simply connect it to the coaxial line and the receiver so it can take power. It may be necessary to select the target satellite by carrying out a basic scan. No software installation or advanced settings are required on typical equipment.
Does the product include accessories in the box such as cables or a protective case?
It generally includes the finder, a short F-type coaxial cable and a user manual. It usually does not include a protective case or other additional accessories, although this may vary depending on the supplier or batch.
How is the Satlink WS6903 powered?
It is powered directly from the satellite receiver with a voltage of 13-18V, so it does not need batteries or external power supplies.
What frequency range does this signal finder measure?
The Satlink WS6903 measures signals in a range of 920 to 2150 mHz, suitable for most satellite TV signals.
Is it compatible with all satellite receivers?
It is compatible with receivers that supply power through the coaxial cable within the specified voltage range.
Can I use it to detect weak signals?
Yes, its input range of -40 dBm to -10 dBm allows both weak and strong signals to be detected accurately.