GOOT WICK CP-2515 desoldering braid 2.5 mm x 1.5 metres

The Goot Wick CP-2515, at 2.5 mm wide, is ideal for removing solder from tracks and medium-sized components. Compared with narrower braids (e.g. 1.5 mm), it covers more surface in fewer passes, speeding up the process on standard boards. However, for high-precision work on dense circuits, a thinner braid may be preferable. Compared with wider widths, 2.5 mm retains good control while avoiding excessive material drag. The trade-off is between speed and precision.

The braid is made from high-purity braided copper, coated with a special flux agent to improve solder absorption. The roll contains exactly 1.5 linear metres, with a width of 2.5 mm according to the manufacturer’s specification.

Yes, the Goot Wick CP-2515 braid can be used with leaded and lead-free solder (SnAgCu, SnCu), withstanding typical soldering iron tip temperatures of 280–400 °C. It is recommended to avoid exposure above 450 °C to prevent degradation of the flux or copper.

It is advisable to store the braid in a dry place and in its original packaging to prevent copper oxidation and flux deterioration. After opening, it is recommended to keep the end sealed or covered and avoid handling it with dirty or wet hands, as moisture reduces its effectiveness.

Goot Wick usually stands out for having fine-grain copper, low flux residue and a regular weave, which provides uniform and fast solder absorption. Comparative tests show up to 20–30% less time to remove solder compared with generic braids of the same width, and a lower risk of conductive residue on the board.

It is used to remove excess or faulty solder from electronic components, making repairs and modifications on circuit boards easier.

The braid measures 2.5 mm wide by 1.5 metres long.

Yes, it is compatible with most soldering stations and desoldering tools on the market.

It allows solder to be removed quickly and cleanly, helping to avoid damage to boards and making precision work easier.