Mechanic D3 laminating agent for bubble-free LCD screens
Brand: Mechanic
VAT included (Ex VAT: 20.00 €)
Volume Discounts
| Quantity | Price | Save |
|---|---|---|
| 2+ | 23.37 € | -5% |
Mechanic D3 laminating agent is a product designed for maintenance technicians who face the challenge of preventing bubbles when replacing LCD screen glass. During the replacement of broken glass, bubbles can be a common problem that makes it difficult to achieve a perfect finish.
This agent is used by spraying the glass with the liquid three times before placing the glass and liquid crystal. Then, the screen is placed in the bubble removal machine (autoclave) to eliminate the bubbles. After this process, approximately 90% of screens are bubble-free, significantly improving the quality of the repair.
The product was developed and tested in several screen repair centres in China. Although it does not completely replace the laminating machine, it is a suitable solution for processing small batches of screens and reducing the need for multiple bubble removal cycles.
Main features:
- Contents: 50 ml of liquid laminating agent.
- Designed to prevent bubbles in LCD screen repair.
- Applied in three layers on the glass before the bubble removal process.
- Compatible with bubble removal machines (autoclave) to eliminate bubbles.
- Ideal for maintenance and repair technicians of electronic devices.
Typical uses:
- Repair and replacement of broken glass in LCD screens.
- Improving the finish on touchscreens by preventing bubbles.
- Processing small batches of screens in repair centres.
Compatibility: Compatible with most LCD and touchscreen displays that require a laminating and bubble removal process.
It is recommended to watch the explanatory video to understand the application process and optimise the results.
- 50 ml bottle of liquid laminating agent.
- Prevents bubbles in LCD screen repairs.
- Apply 3 times to the glass before the bubble removal process.
- Compatible with bubble removal machines (autoclave).
- Ideal for screen repair and maintenance technicians.
Customer Questions & Answers
What specific advantage does the Mechanic D3 Laminating Agent offer compared with not using any agent during screen replacement?
Mechanic D3 significantly reduces bubble formation during glass lamination on screens, increasing the success rate of the process by up to 90% according to tests. Its use minimises the need to repeat cycles in the bubble-removal machine, optimising time and quality control.
What type of screens or devices is this agent compatible with? Are there any materials or adhesives with which it is not recommended?
Mechanic D3 is designed for glass-based screens (LCD and OLED) during glass replacement. It works well with conventional UV LOCA and OCA adhesives, but is not recommended with structural acrylics or other non-polar polymers, where it may not adhere or spread properly.
What are the recommendations for storage and shelf life of this liquid once opened?
The agent should be stored in a cool, dry place, away from direct light and heat sources, with the bottle tightly closed. Once opened, it is recommended to use it within 12 months to maintain effectiveness; at temperatures above 30°C or with prolonged exposure to air, it may lose its properties.
If bubbles remain after the process, does the agent make them easier to remove afterwards, or does the whole cycle need to be repeated?
The agent helps remove bubbles during the autoclave stage, but if they remain, it is generally necessary to disassemble everything and repeat the application. It does not guarantee complete bubble removal outside the standard cycle, due to the nature of the adhesive after curing.
Does the product comply with international chemical handling safety standards? What precautions should be observed during use?
Mechanic D3 is not toxic in normal use, but it does not have declared international certifications such as REACH/RoHS on its datasheet. Eye protection and gloves should be used, the work area should be ventilated and prolonged skin contact should be avoided. In case of splashes, wash with plenty of water.
How do you use the Mechanic D3 laminating agent?
Spray the glass with the liquid three times before placing the glass, then use the bubble removal machine to eliminate the bubbles.
Does the Mechanic D3 laminating agent replace the laminating machine?
No, this product does not completely replace the laminating machine, but it helps reduce bubbles in small batches of screens.
What type of screens is this agent suitable for?
It is suitable for LCD and touchscreen displays that require a laminating and bubble removal process.
What is the product content?
The product contains 50 ml of liquid laminating agent.
Is the product available for immediate dispatch?
Currently the product is out of stock and not available for immediate dispatch.
Write a customer review
Customers who bought this item also bought
Your Recently Viewed Items
