Aoyue Ty98 soldering iron tip cleaner with bronze and steel metal sponge
Brand: Aoyue
VAT included (Ex VAT: 3.84 €)
The Aoyue Ty98 soldering iron tip cleaner is an essential accessory for keeping soldering tips clean and in optimum condition. Designed with a metal sponge made up of 85% bronze and 15% steel, it provides effective cleaning without the need to wet the sponge, helping prevent the soldering iron tip from cooling and ensuring consistent performance during work.
This cleaner includes a practical stand with a rubber base that provides stability and prevents slipping during use, making it easier to clean tips quickly and safely.
Key features
- Sponge material: Bronze (85%) and steel (15%) for effective, long-lasting cleaning.
- Stand: Made from aluminium with a rubber base for greater stability and convenience.
- Compact size: 90 x 90 x 45 mm, ideal for smaller workspaces.
- Cleaning without moisture: No need to wet the sponge, helping prevent tip cooling and improving efficiency.
Typical uses
This cleaner is ideal for professionals and hobbyists working with soldering stations who need to keep their tips in optimum condition. It is compatible with most soldering irons and soldering stations, especially those that require frequent cleaning to extend tip life and ensure clean, precise solder joints.
Compatibility and maintenance
The Aoyue Ty98 is compatible with various soldering iron brands and models, making it a universal tip-cleaning accessory. Its moisture-free design makes maintenance easier, helping avoid damage from oxidation or corrosion that can occur with traditional methods.
To keep the cleaner in good condition, it is recommended to remove any accumulated metal residue and store it in a dry place.
- Bronze (85%) and steel (15%) metal sponge for effective cleaning
- No need to wet the sponge, helping prevent the soldering iron tip from cooling
- Includes a stand with a rubber base for stability during cleaning
- Compact 90 x 90 x 45 mm size, easy to place in the work area
- Compatible with most soldering irons and soldering stations
Customer Questions & Answers
What are the dimensions and materials of the Aoyue Ty98, and what is the approximate weight of the set?
The Aoyue Ty98 measures 90 x 90 x 45 mm. The stand is made from aluminium and rubber, while the sponge is made from bronze and steel. The typical weight of the set is approximately 200-250 g.
Is this cleaner compatible with soldering iron tips of different diameters and brands, or are there limitations?
The Aoyue Ty98 design accepts soldering iron tips of various diameters and brands, provided the tip can fit into the metal sponge and the base provides the required support. It is not recommended for tips outside the commonly used range (approx. 1-8 mm diameter).
What maintenance does the metal sponge require, and how often should it be replaced for typical moderate use?
The metal sponge should be shaken out occasionally to remove accumulated residue. It is recommended to replace it when it shows loss of elasticity or excessive residue build-up, typically every 3-6 months with moderate use.
Does it comply with any safety standard for manual soldering tools, and is there a risk of scratching tips with special coatings?
No safety certification is specified. The material is less abrasive than pure steel, but on tips with delicate coatings there may be wear if excessive pressure is applied. It is recommended to clean gently and check compatibility according to the tip manufacturer's specifications.
Do I need to wet the sponge to clean soldering iron tips?
No, the Aoyue Ty98 uses a metal sponge that cleans tips without needing to be wetted, helping prevent the tip from cooling.
What type of soldering irons is this cleaner compatible with?
It is compatible with most soldering irons and soldering stations, making it a universal tip-cleaning accessory.
What materials make up the metal sponge?
The sponge is made up of 85% bronze and 15% steel, which ensures effective and long-lasting cleaning.
Does it include a stand for the cleaner?
Yes, it includes a stand made from aluminium with a rubber base for greater stability and convenience during use.
What is the size of the cleaner?
The cleaner measures 90 x 90 x 45 mm, making it compact and easy to place in the work area.
Write a customer review
Customers who bought this item also bought
Zhuomao BGA Nozzle 45x45 mm compatible with Mlink and Zhenxun for soldering stations
Zhuomao BGA Nozzle 12x12 mm compatible with Mlink and Zhenxun for soldering stations
Zhuomao 15x15 mm BGA nozzle compatible with Mlink and Zhenxun for soldering stations
Your Recently Viewed Items
