Arduino RFID Starter Kit with RTC DS1302 and I2C LCD
Brand: satkit
VAT included (Ex VAT: 35.00 €)
Volume Discounts
| Quantity | Price | Save |
|---|---|---|
| 2+ | 41.33 € | -4% |
| 10+ | 40.04 € | -7% |
| 20+ | 36.59 € | -15% |
The Arduino RFID Starter Kit is a complete solution designed for those who want to get started in the world of Arduino and RFID technology. This kit includes everything needed to develop practical and educational projects, making it easier to learn and experiment with electronic components and control modules.
Kit contents:
- 1x compatible Arduino UNO R3 board
- 1x 830-point solderless breadboard
- 1x stepper motor with driver board
- 1x RFID-RC522 module for reading RFID tags
- 1x round RFID proximity ID tag
- 1x RGB tricolour LED module
- 1x Joystick module
- 1x 5V 1-channel relay
- 1x 1602 LCD module with I2C interface
- 1x sound sensor (microphone)
- 1x high-sensitivity water sensor
- 1x 4x4 matrix keypad
- 1x RTC DS1302 real-time clock module
- 1x DHT11 digital temperature sensor
- 1x 1-digit 7-segment LED display
- 1x 4-digit 7-segment LED display
- 1x SG90 Tower Pro Micro 9g servo motor
- 1x active and passive buzzer
- 1x 74HC59 8-bit shift register
- 1x potentiometer
- Resistors: 5x 1K Ohm, 5x 10K Ohm, 5x 220 Ohm, 3x light-dependent
- 4x yellow buttons
- 15x LEDs
- 1x flame sensor
- 1x infrared sensor
- 2x tilt sensors
- 1x LM35 temperature sensor
- 1x USB cable
- 1x 9V battery cable
- Pack of jumper wires and female-to-male cable
- 1x IR remote control
Main features:
- Compatible with Arduino UNO R3, ideal for beginners and educational projects.
- Includes RFID-RC522 module for identification and access control projects.
- RTC DS1302 module to keep time in projects that require real-time operation.
- 1602 LCD display with I2C interface for easy data viewing.
- Wide variety of sensors and actuators for experimenting with different types of inputs and outputs.
- Essential electronic components for developing circuits and prototypes without soldering.
Typical uses:
- Learning programming and electronics with Arduino.
- Developing RFID-based access control systems.
- Automation and monitoring projects with temperature, sound, water and flame sensors.
- Testing and prototyping with stepper motors and servo motors.
- Creating user interfaces with LCD, buttons and joystick.
Compatibility: This kit is compatible with the Arduino IDE development environment and is ideal for users who want to get started with Arduino and RFID. All included components are compatible with each other and with Arduino UNO R3, making project integration and development easier.
Important note: This product is currently out of stock. We recommend checking other available Arduino kits or signing up to receive notifications when it is back in stock.
- Includes a compatible Arduino UNO R3 board for starter projects.
- RFID-RC522 module and RFID tag for identification and control projects.
- RTC DS1302 module to keep time in real time.
- 1602 LCD display with I2C interface for easy viewing.
- Wide range of sensors and actuators for multiple applications.
Customer Questions & Answers
What are the electrical and compatibility requirements of the modules to ensure correct operation with the included Arduino UNO board?
All modules in the kit are designed to work at 5 V DC, which is supplied by the Arduino UNO board. Communication is mainly via standard digital/analogue pins, and some modules use I2C (such as the I2C LCD) or SPI (such as the RFID-RC522). It is not natively compatible with 3.3 V boards or other microcontroller families without level shifting. The included battery adapter supports 6–12 V DC sources (typically a 9 V battery).
Does it require soldering or additional tools to get the projects in this kit up and running?
No soldering is required, as all modules can be connected using the breadboard and cables included. However, for permanent or more robust projects, soldering the connections later may be advisable. The kit is designed for manual assembly and disassembly without specialist tools.
What does the Arduino RFID starter kit include?
The kit includes a compatible Arduino UNO R3 board, RFID-RC522 module, RFID tag, RTC DS1302 module, I2C LCD display, sensors, motors, buttons, resistors and cables for prototyping.
Is this kit suitable for beginners?
Yes, this kit is designed for beginners who want to learn programming and electronics with Arduino and RFID technology.
Can I use this kit for access control projects?
Yes, the RFID-RC522 module and RFID tag allow you to develop access control systems and identification projects.
Is the kit available for immediate purchase?
The product is currently out of stock. It is recommended to look at alternatives or wait for restock.
Is it compatible with Arduino IDE software?
Yes, all components in the kit are compatible with Arduino IDE to make programming and development easier.
Write a customer review
Customers who bought this item also bought
MQ-2 Smoke and Gas Sensor for Arduino - Compatible Detector Module
